Fitness testing in London.
Find your thresholds and train to zones that fit you. Choose a lactate test or a Tymewear breathing test, both run in person by a British Cycling Level 3 coach, with a full report and training zones afterwards.
Lactate test
A step test with small finger-prick samples at each stage. We measure how your blood lactate rises with effort and pinpoint your two thresholds, LT1 and LT2.
- A step test for LT1 and LT2, or an MLSS test for your highest sustainable effort
- Power and heart rate at each threshold
- Training zones built from your results
- At your place on the turbo, or out on the road
- All testing materials and a full written report
Tymewear test
A step test wearing a Tymewear VitalPro chest strap, which tracks your breathing alongside heart rate. From the way your breathing changes with effort we find your ventilatory thresholds, VT1 and VT2.
- VT1 and VT2 found from your breathing
- No finger-prick samples
- Power and heart rate at each threshold
- Training zones built from your results
- A written report
Two ways to find your thresholds.
Both tests find the two turning points that matter most for training: the top of your easy zone, and the most you can hold for a long, hard effort. They measure different things, so the numbers are related but can differ, sometimes by tens of watts.
Choose lactate if
- You want thresholds measured directly from your blood
- You plan to retest through the season and compare like for like
- You're targeting time trials, track or racing where precise zones matter
Choose Tymewear if
- You'd rather skip the finger pricks
- You want a lower-cost way to set your zones
- You're new to testing and want a solid starting point
Lactate vs ventilatory thresholds.
Lactate and ventilatory thresholds are closely related, and they aren’t interchangeable. They pick out similar changes in intensity by measuring different things: the lactate in your blood, or the way your breathing changes.
LT1 and VT1. LT1 is the first sustained rise in blood lactate above baseline. VT1 is the first disproportionate rise in breathing relative to oxygen uptake. Both mark the move from moderate to heavy intensity, where breathing is still controlled and you can hold a conversation. In a study of 14 trained cyclists they averaged 214 W and 200 W, and the gap for individual riders was much bigger than that.
LT2 and VT2. LT2 is a higher lactate breakpoint, defined differently by different testing methods. VT2, the respiratory compensation point, is a further jump in breathing relative to carbon dioxide output. In the same study VT2 sat around 304 W while maximal lactate steady state (MLSS) was around 255 W, so related markers can differ by tens of watts.
There’s no fixed wattage gap between the two. One rider’s LT1 might sit above their VT1 and another’s below, and neither is a testing error. LT1 or VT1 can cap your easy endurance work. LT2, VT2 and FTP are related numbers, each measured its own way, so we don’t swap one for another.
Train with your numbers.
- Zones set from you. Every session targets the right system.
- Progress you can measure. Test at the start of each phase and watch your thresholds move.
- The right load. See when training is working and when it is tipping into too much.
From booking to your zones.
Book
Get in touch to agree a date. We test at your place on the turbo, or out on the road, anywhere in London and the surrounding area.
Warm up
We set up the equipment, talk you through the test and start with a gentle warm-up.
Step test
The effort rises in stages while we record power, heart rate, how hard it feels and either your blood lactate or your breathing.
Your report
Your thresholds, the power and heart rate at each, and training zones to use straight away.
Testing that feeds your plan.
A test tells us where your zones sit today. Retest after a block of training and we can see what's changed and adjust your plan to match.
Want the whole picture? Monthly coaching starts at £140 a month.
Already have your numbers?
Use our free calculators to work out your thresholds and zones from your own data.
How much does fitness testing cost?
A lactate test is £140 and a Tymewear breathing test is £95. Both include a report with your thresholds and training zones.
How should I prepare for a test?
Eat no later than an hour before the test. Avoid caffeine, alcohol and nicotine for 24 hours beforehand, and get a good night’s sleep. We’ll ask you to sign a waiver and send you full instructions before the day.
How does the step test work?
It runs on your bike on a turbo trainer. After a gentle warm-up, the effort rises in stages, usually every 6 minutes, while we record heart rate, power and how hard it feels. In a lactate test we take a small blood sample from your finger or earlobe at each stage; in a Tymewear test the strap records your breathing instead. It usually takes 45 to 60 minutes, and we stop early if you need to.
How does an MLSS test work?
Indoors on a turbo, or outdoors on a suitable circuit or climb. After a 15-minute warm-up you ride 10-minute stages, starting just below your estimated MLSS and rising by 10 watts a stage while your lactate stays steady (a rise of 1 mmol/L or less). We take blood samples at 3 and 9 minutes of each stage. It usually takes 45 to 60 minutes.
What’s in the report?
You get first results on heart rate and power straight after the test. Your full report follows within a few days: your thresholds, heart rate, power, effort ratings and lactate readings, your training zones, and recommendations for your training.
What's the difference between lactate and ventilatory thresholds?
Lactate thresholds come from the lactate in your blood. Ventilatory thresholds come from how your breathing changes as the effort rises. They mark similar changes in intensity but often land at different power outputs, so we use each set of results on its own terms to set your zones.
What is a Tymewear strap?
The Tymewear VitalPro is a chest strap that tracks your breathing alongside heart rate. We use it to find your ventilatory thresholds without blood samples.
Where do the tests take place?
At your place on the turbo, or out on the road, anywhere in London and the surrounding area.
How often should I retest?
Retesting after a block of training shows what's changed and keeps your zones accurate. We'll suggest when, based on your plan and your events.
Book and pay.
Pay online and we’ll be in touch to agree a date. For a lactate test, choose a step test (LT1 and LT2) or an MLSS test. The Tymewear test is a step test with the breathing strap.

